Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Replacing the battery in your Opel Mokka is not a complex task, but it requires careful attention as you need to remove the electronic module located just below the battery. Before proceeding, ensure the engine is off. Lift the bonnet and locate the battery on the right side of the engine bay. Just below it is the electronic component to be removed.

First, disconnect the two battery terminals, starting with the negative (black) one. Next, using a flat screwdriver, remove the small water reservoir for the windscreen washers. At this point, unscrew the screw holding the electronic module and remove it completely.

You will then have access to the battery security screw. Unscrew it and remove the old battery.

Replace it with the new one and finally reassemble all the components you removed earlier.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to replace the battery in the Opel Mokka?
How to replace the battery in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial, you will learn how to replace the battery in the Opel Mokka, a very simple and quick operation. First, ensure the key is not in the…
How to Replace the Remote Battery on an Opel Mokka?
How to Replace the Remote Battery on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To replace the remote battery on an Opel Mokka, lift the key by pressing the designated button located at the top of the device: this will allow you …
How to Replace the Remote Battery on an Opel Mokka?
How to Replace the Remote Battery on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) You can replace the remote battery on an Opel Mokka by prying with an object at the top of the remote: this way, you can detach the panel on the back…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos