Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the bulbs in the Opel Corsa C instrument cluster?

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Instrument panel light

In order to replace the Opel Corsa C instrument cluster bulbs, you have to remove the plastic covers that wrap around the steering column. Once these panels have been removed, the panels located in the lower and upper part of the instrument panel must also be removed. At this point, the screws that secure the instrument panel must be unscrewed, so that it can be extracted by disconnecting the connectors as well: at this point the panel can be opened at the rear, removing the old bulbs and inserting the new ones.

Posted on 10 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulbs in the instrument panel of the Opel Corsa
How to replace the bulbs in the instrument panel of the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Today's instructions will show us how to disassemble and replace the bulbs of the instrument panel of the Opel Corsa, in simple steps. First, we get …
How to replace the bulbs in the instrument panel of the Opel Corsa
How to replace the bulbs in the instrument panel of the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) These short and simple steps will show us how to disassemble and replace the bulbs of the instrument panel of the Opel Corsa. First, we get into the …
Opel Corsa D ceiling light bulb replacement
Vauxhall Corsa (2006-2014 / Corsa D) Let's see how to remove the ceiling light of an Opel Corsa and how to replace the bulbs. We lever between the ceiling light and the sky panel, take t…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos