Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

The procedure for replacing the timing chain is quite complex; here are the main steps to follow. Start by removing the battery, the coolant reservoir, and the front right wheel.

Then locate the auxiliary belt and loosen it by removing a pulley. Next, remove the water pump and, importantly, lock the relative motion of the camshaft and crankshaft in relation to the engine block to maintain the correct timing.

Remove the oil sump and also lock any movement of the flywheel. Next, remove the timing chain cover and take off the tensioners.

At this point, you can remove the chain and install the new one. Proceed to reassemble all components in reverse order.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Vauxhall Corsa (2006-2014 / Corsa D) The information below will assist you in the process of dismantling and replacing the timing chain on the Opel Corsa 1.0. The timing chain replacemen…
How to Replace the Timing Chain on the Opel Corsa?
How to Replace the Timing Chain on the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the timing chain on the Opel Corsa, open the bonnet to access the left side of the engine block. Here, around the respective sprockets, yo…
Guide to Replacing the Timing Chain on the Opel Corsa 1.3 CDTi
Guide to Replacing the Timing Chain on the Opel Corsa 1.3 CDTi
Vauxhall Corsa (2006-2014 / Corsa D) Today's guide will provide essential information for replacing the timing chain on the Opel Corsa 1.3 CDTi. The manufacturer states that the timing c…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos