Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Gear Lever Gaiter

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Shift knob

The gaiter covering the gear lever is generally made of synthetic leather and tends to deteriorate over time; replacing it is very simple. Just unclip the frame at the base of the gaiter, fold it upwards, and remove the plastic clip that secures it just below the gear knob. Then free the frame at the base of the gaiter and fit the new one by inserting the lower flap into the groove along the edges. Insert the new gaiter onto the gear lever upside down, secure it under the knob by pulling the clip, and roll it down, attaching the frame to the base of the centre tunnel.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the gear knob on an Opel Corsa
Replacing the gear knob on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today, discover how to remove and replace the manual gear knob on an Opel Corsa. First, get inside the cabin and pull the gear knob upwards with forc…
Removing the Gear Knob Gaiter on an Opel Corsa
Removing the Gear Knob Gaiter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this video, you will learn how to remove the gear knob gaiter on the Opel Corsa. First, you need to unclip it: you will need something sharp like …
How to Remove the Gear Knob and Gaiter on an Opel Corsa
How to Remove the Gear Knob and Gaiter on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Follow these steps to remove and replace the gear knob and gaiter on an Opel Corsa. First, get inside the vehicle and detach the gaiter from the base…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos