Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Bulb on the Opel Vectra

Model: Vauxhall Vectra Vectra C, MK 3 - Years 2002-2008
Part: Tail light bulb

To replace the rear brake bulb on the Opel Vectra, start by opening the boot. Remove the side cover of the headlamp that needs changing. Disconnect the clips holding the bulbs, identify the bulb to be replaced, press the bulb and turn it counterclockwise to remove it. Take the new bulb, insert it into the holder, press and turn slightly clockwise to secure it. Check that it works, then reconnect the bulbs to the headlamp until you hear the clips click into place. Refit the side cover of the headlamp, then close the boot.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Opel Vectra
How to replace the front headlight bulb of the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Today's guide will show us the main steps that will allow us to disassemble and replace the headlight bulb of the Opel Vectra. First, we open the hoo…
How to Replace Wing Mirror on Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Is the external mirror on your Opel Vectra broken? Replace it with a new one. Use a plastic-covered lever to pry between the perimeter of the mirror …
How to Replace the Instrument Cluster Bulb in the Opel Vectra
How to Replace the Instrument Cluster Bulb in the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Below are the instructions that will allow you to remove and replace the bulbs in the instrument cluster of the Opel Vectra. First, get inside the ve…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos