Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Warning light – error code

When a vehicle requires servicing, it must always be heeded. This is even more true for a commercial vehicle like the Opel Vivaro. Perform the service when required for your safety and that of others. After this, proceed to reset the warning light. Get into the vehicle and close all four doors. Turn on the ignition: press and hold the button on the right side of the screen, near the rev counter, which has a small spanner icon. A countdown from 10 to 0 will begin. When it reaches zero, you can release the button. Turn off the ignition and then turn it back on. The service light should be off.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service of the Opel Vivaro
How to Reset the Service of the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) To reset the service of the Opel Vivaro, start by turning on the instrument cluster. Use the lever on the right of the steering wheel that controls t…
How to reset the service light in the Opel Vivaro van?
How to reset the service light in the Opel Vivaro van?
Vauxhall Vivaro (2001-2014 / MK 1) In this tutorial we can see how to reset the service in the Opel Vivaro van, an extremely simple and quick operation, to be carried out only once all…
How to Reset the Service Light on an Opel Vivaro Van?
How to Reset the Service Light on an Opel Vivaro Van?
Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial, you will see how to reset the service light on an Opel Vivaro van, a very simple and quick operation to perform only after completi…

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where to find the radio code of the Opel Vivaro? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos