Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on an Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Parking brake

Here’s how to adjust the handbrake on an Opel Corsa: Enter the cabin and remove the cover that conceals the handbrake mechanism. This can be done easily by hand, without any specific tools. Once you have lifted the cover, you will see a small lever. This is the handbrake adjuster. Pull the handbrake lever all the way down, remove the adjuster cap, then use a 10mm spanner to tighten the nut until it feels right, testing to see if it is correct, as it may have been tightened too much; it should click at least three times before feeling tension. If all is well, replace the cap over the screw, then pull down the boot, replace it, and the job is done.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on the Opel Corsa
How to Adjust the Handbrake on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Today, I will explain how to independently adjust the handbrake on the Opel Corsa model 2. To carry out these simple steps, get into the vehicle, sit…
How to Adjust the Handbrake of an Opel Corsa
How to Adjust the Handbrake of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, sit in the driver's seat of your Opel Corsa. Begin by pulling up the gaiter of the handbrake lever to access the adjustment scr…
How to adjust the handbrake of the Opel Corsa model D
How to adjust the handbrake of the Opel Corsa model D
Vauxhall Corsa (2006-2014 / Corsa D) The following video tutorial will show you the steps to adjust the handbrake of the Opel Corsa model d. The first step is to remove the faux leather …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos