Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Rear Headlamp

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Tail light

See other generations:
Video tutorial

Removing the rear headlamp is extremely simple as there are no recessed elements; just unscrew the two fixing screws. Open the boot and locate the fixing screws of the rear headlamp along the boot closure line; one is located towards the bottom and the other a bit higher.

Once the screws are removed, pull the headlamp away from its housing and disconnect the power connector. Proceed in reverse for reassembly by connecting the plug, seating the headlamp in its housing, and tightening the fixing screws.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Vauxhall Corsa (2000-2006 / Corsa C) Removing the rear light is extremely simple as it is secured with just two easily accessible screws: once the rear hatch is open, the two screws secu…
Vauxhall Corsa (2014-2019 / Corsa E) Below are the instructions that will allow you to disassemble and replace the rear light and its bulbs on the Opel Corsa in simple steps. First, open…
Vauxhall Corsa (2014-2019 / Corsa E) Are the rear lamp bulbs blown? Here's how to remove them from inside the lamp. Lift the tailgate of the Opel Corsa, identify the parts to disassemble…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos