Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the coolant tank in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Checks and maintenance

In this tutorial we can see how to replace the coolant tank on the Opel Mokka, a very simple and fast operation. Before proceeding, let's make sure that the engine is completely cold in order to avoid burns. We start by opening the bonnet, then remove the upper plastic panel retaining clips with a flat bladed screwdriver. Once removed, we open the cap of the tank, place a container below it and disconnect both the upper and lower pipes. Finally, unscrew the two fixing bolts and assemble the spare part following the reverse procedure.

Posted on 20 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Mokka (2012-2019 / Mokka A) In today's video tutorial we will see the steps to replace the cabin air filter on an Opel Mokka, in simple and quick steps. First, we open the front…
Vauxhall Mokka (2012-2019 / Mokka A) Replacing the rear light bulb in an Opel Mokka is very simple, as we can see from the attached video guide. First of all, let's go to the luggage com…
Vauxhall Mokka (2012-2019 / Mokka A) If we need to replace all the Opel Mokka rear light bulbs, we have to remove the entire headlight assembly. This is an easy operation, but you need t…

    Frequently Asked Questions

    • Mokka 2012-2019 - What probable issues have been identified in the past with the Opel Mokka 1.4 turbo? Read answer
    • Mokka 2020-2027 - Have there been any issues found with the Opel Mokka 1.2 turbo? Read answer
    • Mokka 2012-2019 - What do codes 82 and 89 indicate on the Opel Mokka? Read answer
    • Mokka 2020-2027 - How much does it cost to put an LPG system on an Opel Mokka? Read answer
    • Mokka 2012-2019 - What do the codes 82 and 89 of the Opel Mokka mean? Read answer

How to Remove the High-Pressure Fuel Pump on VW Golf

In this video, learn how to remove the high-pressure fuel pump on the Volkswagen Golf. Lift the bonnet and secure it, then remove the engine soundproofing panel. Using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the piece from the engine bay. Start removing the fastening pins of the pump as shown in the video. Once the piece is detached from its seat, disconnect the clip present on it. Finally, refit the high-pressure fuel pump in the engine bay, along with the intake pipe and the soundproofing panel.

Watch the video!


by ScegliAuto

More videos