Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Service warning light

If you have replaced the engine oil and filter on this model of vehicle, the following description outlines the steps to take and the procedures to follow for the reset, and you can also refer to the video. Once seated in the driver's seat, do not switch on the ignition. Press and hold the accelerator pedal fully down, and simultaneously turn on the ignition. Then, press the brake pedal three times in quick succession, and release the accelerator. After that, turn off the ignition and then turn it back on to check that the warning light has turned off.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro Van?
How to Reset the Service Light on the Opel Vivaro Van?
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light on the Opel Vivaro van, as shown in this tutorial, is an extremely simple and quick task. Before proceeding, ensure that …
How to Reset the Service Light on an Opel Vivaro
How to Reset the Service Light on an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Here’s how to reset the Service light on the Opel/Vauxhall Vivaro: first, get in the vehicle and close all the doors; also engage the handbrake. Then…
How to Reset the Service Light on an Opel Vivaro Van
How to Reset the Service Light on an Opel Vivaro Van
Vauxhall Vivaro (2014-2019 / MK 2) .. In this tutorial, you will see how to reset the service light on an Opel Vivaro van, a very simple and quick operation to perform only.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos