Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Number Plate Bulb on the Opel Astra

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: License plate light

In this video tutorial, you will learn how to remove and replace the number plate bulb on the Opel Astra, following the instructions below. First, move to the rear of the vehicle and begin by removing the plastic cover of the number plate light; to do this, lever it off using something thin and pointed, like a flat screwdriver, as shown in the video. At this point, remove the light from the bulb holder, replacing the bulb with a new one (having the same fitting); then refit the cover onto the bulb holder!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

What Does Error Code 24 Indicate on the Opel Astra?
What Does Error Code 24 Indicate on the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) Error code 24 on the instrument panel of the Opel Astra model J indicates a malfunction of the number plate light bulb. To reset the error code, it i…
How do you replace the license plate light bulb of the Opel Astra?
How do you replace the license plate light bulb of the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) In order to replace the license plate light bulb of the Opel Astra, you need to use an object to pry and detach the small light fixture above the lic…
Replacing the Number Plate Lights on the Opel Astra
Replacing the Number Plate Lights on the Opel Astra
Vauxhall Astra (2015-2022 / Astra K) Today’s guide will show you the procedure for removing and replacing the number plate lights on the Opel Astra. First, move to the rear of the vehicl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos