Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Astra
    4. : How to remove the front bumper on the Opel Astra?

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Front bumper
Operation: How to remove the front bumper on the Opel Astra?

As we can see in this tutorial, removing the front bumper on the Opel Astra H is a very simple and fast operation. We start by opening the engine hood, then, using a flat-tip screwdriver, we remove the 4 plastic rivets located on the upper edge and remove the grille. Then, we go under the vehicle, remove the additional rivets in the same way, and unscrew the bolts located inside the wheel arches. At this point, we can grab the bumper from one of the two ends, pull it outwards, and separate it from the frame. We follow the reverse procedure to install the replacement if necessary.


Posted on 2 July 2023 by ScegliAuto



How do you remove the front bumper of the Opel Astra?
Vauxhall Astra (2015-2022 / Astra K) In order to replace the front bumper of the Opel Astra, you have to go and open the hood, so that you can access the screws that fix the bumper from
Mount the front bumper on Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) How to mount the front bumper yourself? Let's see how the bumper of the Opel Astra is mounted. We position the front bumper perfectly on the car body
How do you remove the front bumper of the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) The removal of the front bumper of the Opel Astra is carried out by opening the bonnet, so that we can have access to the screws located in the upper

Other guides that may interest you

    Frequently Asked Questions

    • Astra 2004-2010 - Where can you find the front bumper of the Opel Astra H? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos