Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Ignition Switch in the Opel Combo Van?

Model: Vauxhall Combo Combo D, MK 4 - Years 2012-2018
Part: Checks and maintenance

In this tutorial, we will see how to remove the ignition switch in the Opel Combo van, a very simple and quick operation to perform, for example, if the key is stuck. First, unscrew all the screws located at the bottom of the steering column using a Torx screwdriver, then remove the cover and locate the small slot beneath the ignition switch. Next, insert a screwdriver into it, unlock the retaining clip, and pull out the switch from its housing using the key. To install the replacement, simply follow the reverse procedure.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in an Opel Combo Van?
How to Set the Time in an Opel Combo Van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) In this tutorial, you will see how to set the time in an Opel Combo van, a very simple and quick operation, for example, after disconnecting the batt…
How to Reset the Service on an Opel Combo Van?
How to Reset the Service on an Opel Combo Van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) Resetting the service on the Opel Combo van, as shown in this tutorial, is very simple and quick. Before proceeding, ensure all scheduled maintenance…
How to Reset the AdBlue Warning Light on an Opel Combo?
How to Reset the AdBlue Warning Light on an Opel Combo?
Vauxhall Combo (2012-2018 / Combo D, MK 4) To deactivate the AdBlue warning light on an Opel Combo, first top up the system by adding the additive to the designated tank, located on the right …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos