Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Agila
  6. : How do you reset the Service light on the Opel Agila?

Vauxhall Agila - Video tutorial

Model: Vauxhall Agila Agila B - Years 2008-2015
Part: Checks and maintenance
Operation: How do you reset the Service light on the Opel Agila?

The procedure for resetting the Service light on the Opel Agila involves holding down the button located on the left side of the instrument panel. While holding down this button, the instrument panel should be turned off. Then, while still holding down the button, the ignition key should be inserted into its slot and turned to start the instrument panel. Once the instrument panel is turned on, the button should be held down until the light is properly reset. After resetting the light, the button can be released and the display can be turned off if desired.


Posted on 17 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Agila 2008-2015 - What problems does the Opel Agila have with its gearbox? Read Answer
    • Agila 2008-2015 - What ignition problems does the Ople Agila have? Read Answer
    • Agila 2008-2015 - What is the problem with the Opel Agila power steering? Read Answer
    • Agila 2008-2015 - Where is the inertia switch of the Opel Agila located? Read Answer
    • Agila 2008-2015 - What are the dashboard warning lights of the Opel Agila? Read Answer
    • Agila 2000-2007 - What do the warning lights on in the instrument cluster of the Opel Agila A from 2001 mean? Read Answer
    • Agila 2000-2007 - How do you remove the electrical contacts of the ignition lock of the Opel Agila? Read Answer
    • Agila 2000-2007 - Where is the oil reservoir for the power steering of an Opel Agila located? Read Answer
    • Agila 2008-2015 - What warning lights are present on the dashboard of the Opel Agila? Read Answer
    • Agila 2000-2007 - Where is the petrol tank of an Opel Agila located? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos