Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Agila
  6. : How do you reset the Service light on the Opel Agila?

Vauxhall Agila - Video tutorial

Model: Vauxhall Agila Agila A - Years 2000-2007
Part: Checks and maintenance
Operation: How do you reset the Service light on the Opel Agila?

To reset the Service light on an Opel Agila, press and hold the button located in the center of the instrument panel while it is turned off. While holding the button, insert the ignition key into the corresponding slot and turn it to start the instrument panel. Once the panel is turned on, wait a few seconds and the Service light will start flashing. When it stops flashing, it will disappear from the instrument panel and it will be possible to turn it off completely.


Posted on 11 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Agila 2008-2015 - What problems does the Opel Agila have with its gearbox? Read Answer
    • Agila 2008-2015 - What ignition problems does the Ople Agila have? Read Answer
    • Agila 2008-2015 - What is the problem with the Opel Agila power steering? Read Answer
    • Agila 2008-2015 - Where is the inertia switch of the Opel Agila located? Read Answer
    • Agila 2008-2015 - What are the dashboard warning lights of the Opel Agila? Read Answer
    • Agila 2000-2007 - What do the warning lights on in the instrument cluster of the Opel Agila A from 2001 mean? Read Answer
    • Agila 2000-2007 - How do you remove the electrical contacts of the ignition lock of the Opel Agila? Read Answer
    • Agila 2000-2007 - Where is the oil reservoir for the power steering of an Opel Agila located? Read Answer
    • Agila 2008-2015 - What warning lights are present on the dashboard of the Opel Agila? Read Answer
    • Agila 2000-2007 - Where is the petrol tank of an Opel Agila located? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos