Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Combo
    4. : Cabin air filter replacement

Vauxhall Combo - Video tutorial

Model: Vauxhall Combo Combo B, MK 2 - Years 1994-2001
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located in the engine compartment, in a central position, immediately under the windscreen; in order to access the filter housing, it is therefore necessary to open the front hood and remove the plastic covering grille applied just below the windscreen by removing the relative fastening clips; once the cover has been removed and the filter seat is reached, unhook the cover and extract it, make sure that there are no residues of dirt inside the filter seat and insert the new one (we recommend the activated carbon one) orienting it according to the direction of the filter. air flow.


Posted on 8 September 2023 by ScegliAuto



Air conditioning filter replacement
Vauxhall Combo (1994-2001 / Combo B, MK 2) Ordinary maintenance that will make the air emitted by your vehicle healthier, without having to resort to a mechanic or carry out difficult and tedi
How to replace the air filter of the Opel Combo 3.
Vauxhall Combo (2001-2011 / Combo C, MK 3) In this new mini guide, we will discover together how to correctly replace the engine air filter in your Opel Combo Mk3 (year 2001-2011). First, turn
Replacement of the engine air filter in the Opel Combo.
Vauxhall Combo (1994-2001 / Combo B, MK 2) Before replacing the engine air filter in the Opel Combo, we take the precaution (for safety reasons), as in any case of maintenance operations to be

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos