Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on the Opel Vivaro?

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Timing belt

To replace the timing chain on the Opel Vivaro, loosen the bolts securing the right front wheel, removing the inner lining of the wheel arch along with it. Once removed, open the bonnet to detach the left side of the engine block. This will provide access to the underlying timing chain, which can be removed by loosening the bolts securing the chain tensioner; once the old chain is removed, install the new one and check its operation.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the timing chain on the Opel Vivaro?
How to replace the timing chain on the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the timing chain on the Opel Vivaro, lift the vehicle and remove the front right wheel along with the corresponding wheel arch cover. This…
Guide to Replacing the Timing Chain on the Opel Vivaro 1.6 CDTi
Guide to Replacing the Timing Chain on the Opel Vivaro 1.6 CDTi
Vauxhall Vivaro (2014-2019 / MK 2) Here are the main instructions on how to dismantle and replace the timing chain on the Opel Vivaro 1.6 CDTi. First, lift the vehicle and begin discon…
How do you replace the timing belt of the Opel Vivaro?
How do you replace the timing belt of the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In order to replace the timing belt of the Opel Vivaro, you need to lift the front right wheel, which must be removed from its seat in order to acces…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos