|
Do it yourself
| |||
| ||||
Overview of Dashboard Warning Lights in a 2016 Opel Vivaro
Model: Vauxhall Vivaro
MK 2
- Years:
2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Here is a list of dashboard warning lights for a 2016 Opel Vivaro. They are divided into red, yellow, and other lights. Red lights refer to: seatbelt warning light, which flashes and sounds for about 90 seconds if the seatbelt is unfastened; battery warning light, which indicates that the battery is not charging and engine cooling may stop; STOP light, which illuminates alongside the battery, oil, and cooling lights, indicating the need to switch off the engine immediately. Temperature light, which activates when the temperature is too high; oil light, which illuminates if the oil pressure or level is too low; ABS light, which comes on when the handbrake is released if the brake fluid level is insufficient. Yellow lights refer to: engine warning light, which indicates a fault in the engine; airbag light, which indicates a fault in the safety system; airbag deactivated light, which comes on if the passenger airbag is off. ABS light, if it stays on while driving, indicates a fault; fuel light, which comes on when the fuel level is very low; diesel particulate filter light, which illuminates if the filter needs cleaning; rear fog light, which activates when it is on; speed limiter light, which comes on when the system is engaged. Other lights indicate: light warning, fog light warning, and main beam warning.
Updated on 24 August 2026 by ScegliAuto
Related tutorials
Vauxhall Vivaro
(2019-2026 /
MK 3, Vivaro C)
On the Opel Vivaro, you can find all the fuses divided within the appropriate fuse boxes installed in the vehicle: in this type of car, there are two…
Vauxhall Vivaro
(2019-2026 /
MK 3, Vivaro C)
On the Opel Vivaro, all fuses are contained within two fuse boxes installed on the vehicle: these are located inside the cabin and in the engine comp…
Vauxhall Vivaro
(2019-2026 /
MK 3, Vivaro C)
All the fuse boxes in the Opel Vivaro contain the fuses that control the operation of the devices installed in the vehicle. These are located inside …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.314
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |