|
Do it yourself
| |||
| ||||
How to Drive a Diesel Opel Astra J When the DPF is Full
Model: Vauxhall Astra
Astra J
- Years 2009-2016
When the DPF of your Opel Astra J is full, the vehicle will prompt you with a message on the central display: "particulate filter full, proceed with regeneration". If the vehicle is still running normally, drive on the motorway (or extra-urban) for at least 20 to 30 minutes under these precise conditions: engine at operating temperature; revs between 2,000 and 3,000 RPM; constant speed between 50 and 68 mph; do not turn off the engine until the warning light disappears. If the vehicle is already in protection mode and does not allow regeneration while driving, do not continue driving, as you risk choking the filter, causing even worse issues. Instead, take the vehicle to a workshop where they will perform forced regeneration using diagnostic equipment while the vehicle is stationary. To avoid this problem, especially if you use this diesel in urban settings, make an extra-urban trip every 500 to 800 miles; use only quality diesel; regularly check the oil level, as a rise indicates diesel has entered the sump; if the car operates a lot in the city, consider periodic cleaning of the DPF.
Posted on 14 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(2015-2022 /
Astra K)
In this video we see what to do if the particulate filter of our Vauxhall Astra CDTI Diesel is full, and the light that comes on in the instrument pa…
Vauxhall Astra
(2009-2016 /
Astra J)
In today’s video tutorial, we will see how to disassemble and replace the injectors on the engine of a 1.3 Diesel Opel Astra. First, open and lift th…
Vauxhall Astra
(2004-2010 /
Astra H)
Remove the diesel filter located in the engine compartment of an Opel Astra. Pull the lever to open the engine compartment and lift the front bonnet,…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Suzuki Jimny?
To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |