Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Change Light on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Service warning light

This useful video guide shows the step-by-step procedure to reset the inspection light, which indicates the remaining life of the engine oil, on an Opel Corsa, model D produced from 2006 to 2014. First, with the vehicle off, briefly press the "TRIP" button on the speedometer to turn on the information display, then press and hold the "TRIP" button again and turn on the vehicle's ignition without starting the engine. Once done, you will see the "InSP" message start to flash, so continue to hold the "TRIP" button until the light resets to complete the process.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Warning Light on an Opel Corsa
How to Reset the Oil Warning Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Resetting the oil change light on your Opel Corsa is really very simple: first, however, you must have actually changed the oil in your vehicle! Turn…
How to Reset the Engine Oil Change Light on the Opel Corsa
How to Reset the Engine Oil Change Light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today, you will learn how to reset the engine oil change light on the Opel Corsa in a few simple steps. First, get in the car and turn on the ignitio…
How to reset the service light on a 2015 Opel Corsa
How to reset the service light on a 2015 Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Today we will explain how to independently reset the service light, related to oil change, on a 2015 Opel Corsa E model vehicle. Turn on the car's in…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos