Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the SERVICE Light on the 2009 Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Today, you will see the procedure to reset the service/oil light on the 2009 Opel Insignia. The procedure takes less than 1 minute and requires no tools or software.

It is recommended to perform this procedure after servicing the car, and note that in some cases, the oil change light is also the service light. To reset it, start the instrument cluster, then press the menu button on the indicator stalk; the oil light will appear, press the SET/CLR button on the side of the stalk, rotate the dial to select 'yes' from the menu that appears, and press the SET/CLR button again to confirm.

At this point, the procedure is complete, and you can restart the instrument cluster.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to reset the Service light on an Opel Insignia?
How to reset the Service light on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The procedure to reset the Service light on an Opel Insignia involves turning on the instrument cluster so that you can navigate through the menu tha…
How to reset the Service light on the Opel Insignia?
How to reset the Service light on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To reset the Service light on the Opel Insignia, turn on the instrument cluster by inserting the ignition key into the corresponding barrel. Once it …
How to reset the Service light on the Opel Insignia?
How to reset the Service light on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To reset the Service light on the Opel Insignia, connect a diagnostic tool to the vehicle's OBD port. Once connected, select the car model and corres…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos