Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on an Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: License plate light

Replacing the number plate bulb (T10 fitting: all-glass bulb) on this vehicle model is very simple as the lamp holder is located just above the number plate itself; simply use a small cross-head screwdriver to unscrew the fixing screws of the plastic cover protecting the lamp holder; once the screws are removed and the protective cover is taken off, you can access the lamp holder, pull out the old bulb and insert the new one; before refitting the cover, ensure the bulb lights up correctly.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the license plate light bulb of the Opel Vivaro?
How do you replace the license plate light bulb of the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In order to replace the license plate light bulb of the Opel Vivaro, you need to pry with an object like a screwdriver to remove the transparent pane…
How to replace the starter motor on the Opel Vivaro?
How to replace the starter motor on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) You can replace the starter motor on the Opel Vivaro by opening the bonnet to access the components in the engine compartment: the motor is located a…
Where to Find the Fuse Box on an Opel Vivaro B
Where to Find the Fuse Box on an Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) If you experience issues with one or more electrical components in your Opel Vivaro B, you can target the respective fuses. In this guide, you will l…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos