Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Tail light

Today we will explain how to replace the rear light bulb of the rear headlight of the Opel Vivaro. To remove the headlight in order to replace the bulb, we need to use a Torx key with a 30 mm insert to unscrew the screws located between the headlight and the tailgate opening. By slightly opening the tailgate, we remove the headlight block, being careful not to pull too hard and damage the connector. We disconnect the connector from the ceiling light to replace the bulbs. We open the ceiling light and remove the burnt-out bulb, inserting a 21-watt bulb. After completing this operation, we mount the headlight back into its housing and screw in the screws to secure it.

Posted on 16 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Fog Light Bulb on a Vauxhall Vivaro
How to Replace the Rear Fog Light Bulb on a Vauxhall Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To replace the rear fog light bulb on a Vauxhall Vivaro (known as Opel Vivaro in the rest of Europe), open the rear hatch, locate the rear fog light …
How to Replace the Rear Bulbs of the Opel Vivaro 2
How to Replace the Rear Bulbs of the Opel Vivaro 2
Vauxhall Vivaro (2014-2019 / MK 2) .. of this short video tutorial, you will learn how to replace the rear light bulb of the Opel Vivaro 2, produced until 2019. The procedure is not complicated.. …
How to replace the headlight bulb of the Opel Vivaro
How to replace the headlight bulb of the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Replacing the left front headlight bulb of the Opel Vivaro is very simple. This operation can be done independently. The first step is to open the fr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos