Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

In this video, we see how to change the front headlight on an Opel Meriva A: as shown in the footage, you need to remove the headlight from its location by taking out the two screws visible on the top of the bonnet. However, there is also a screw at the bottom, and to remove it, you need to slightly move the wing away from the side where you want to take out the front headlight.

Once all three screws are removed, the headlight will come out easily, allowing you to perform the desired operations: replace it with a new one, change the bulb, clean it, or whatever else you need.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp on the 2007 Opel Meriva?
How to Replace the Front Headlamp on the 2007 Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) By watching the attached video, you can learn how to DIY replace the front headlamp on the 2007 Opel Meriva. Start by removing the lateral, upper, an…
How to Remove the Front Headlight from an Opel Meriva?
How to Remove the Front Headlight from an Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To remove the front headlight from an Opel Meriva, lift the front bonnet of the car to access the screws that secure the bumper at the top. Once thes…
Replacing the Rear Light Bulb on the Opel Meriva
Replacing the Rear Light Bulb on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Today, we will see in this video tutorial how to remove and replace the rear light bulb on the Opel Meriva in simple and quick steps. First, open the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos