Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on the Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove and replace the rear light bulb on the Opel Meriva in simple and quick steps. First, open the boot lid and start unscrewing the screws securing the rear light using a cross-head screwdriver for the side screws; then disconnect the electrical connectors of the bulbs found at the back, as illustrated in the video.

At this point, separate the bulb holder from the light unit and replace the bulbs with new ones of the correct type; insert them correctly into the bulb holder and reassemble everything!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light Bulbs on the Opel Meriva
Replacing the Rear Light Bulbs on the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Below are the instructions to replace the rear light bulbs on the Opel Meriva. First, open the rear hatch of the boot and start by removing the side …
Replacing the Rear Fog Light Bulb on an Opel Meriva
Replacing the Rear Fog Light Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) This guide provides instructions for removing and replacing the rear fog light bulb on an Opel Meriva. First, open the rear hatch of the boot and beg…
How to replace the rear headlight bulbs of the Opel Meriva
How to replace the rear headlight bulbs of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Meriva. First of…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos