Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulbs on the Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light bulb

See other generations:
Video tutorial

Below are the instructions to replace the rear light bulbs on the Opel Meriva. First, open the rear hatch of the boot and start by removing the side plastic cover to access the screw securing the light; disconnect the electrical connector for the lights, as shown in the video.

At this point, separate the bulb holder from the ceiling light, replacing any faulty stop bulbs with new ones (having the same fitting); reassemble the rear light, checking the operation of all stop lights.


Posted on 25 April 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulbs of the Opel Meriva
How to replace the rear headlight bulbs of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Meriva. First of…
Change the Bulb on an Opel Meriva
Change the Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Want to replace the bulbs on your Opel Meriva? Here’s how to remove the front headlight bulbs. Locate the inspection cover at the back of the headlig…
Replacing the Rear Light Bulb on the Opel Meriva
Replacing the Rear Light Bulb on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Today, we will see in this video tutorial how to remove and replace the rear light bulb on the Opel Meriva in simple and quick steps. First, open the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos