Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Opel Meriva B

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Cabin air filter

The cabin air filter for this car model is located on the passenger side, just behind the glove compartment: to replace it, you must first remove the glove compartment itself; start by unclipping the side trim of the front tunnel, then remove the trim applied just below the glove compartment by pushing in the retaining clips; next, remove the side trim of the dashboard and proceed to take out the glove compartment: at this point, open the cap of the filter housing and replace the filter.

Updated on 22 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the cabin air filter of the Opel Meriva 2007
How to replace the cabin air filter of the Opel Meriva 2007
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) If you own a 2007 Opel Meriva A and want to learn how to correctly replace the cabin air filter, all you have to do is follow the procedure described…
How to replace the cabin filter on the Opel Meriva?
How to replace the cabin filter on the Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the cabin filter on the Opel Meriva, open the bonnet to access the components inside the engine bay: you will need to loosen the screws se…
Replacing the Fuel Filter on the Opel Meriva 1.6
Replacing the Fuel Filter on the Opel Meriva 1.6
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In today's tutorial, you will learn how to remove and replace the fuel filter on the Opel Meriva, following the instructions below. First, lift the v…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - Where is the pollen filter in the passenger compartment of an Opel Meriva located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos