Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset procedure for the Opel Corsa F screen

Model: Vauxhall Corsa Corsa F - Years 2019-2026
Part: Onboard computer

In this video, see how to perform a reset procedure for the Opel Corsa E and F screen, which is necessary for both the infotainment system and the reversing camera. If a firmware update is not required, try this procedure: turn the key to ignition position two to activate all functions while keeping the engine off. Press and hold the phone button at the top right of the screen for about ten seconds; when you release it, the screen will begin a reboot procedure, clearing most of the errors it may have accumulated. Unfortunately, it will also erase customisations, and you will need to re-enter them, but everything will work perfectly again.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate the On-Board Computer of an Opel Corsa
How to Activate the On-Board Computer of an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) Before you can begin, sit in the driver's seat of your Opel Corsa. Insert the key into the ignition barrel and turn it clockwise. Next, press the but…
How do you reset the infotainment screen on the Opel Corsa f?
How do you reset the infotainment screen on the Opel Corsa f?
Vauxhall Corsa (2019-2026 / Corsa F) Like all electronic equipment, it may happen that the infotainment screen of the Opel Corsa f also freezes, no longer allowing you to use some or all…
How do you change the language of the on-board computer on the Opel Corsa?
How do you change the language of the on-board computer on the Opel Corsa?
Vauxhall Corsa (2019-2026 / Corsa F) To change the language of the onboard computer on the Opel Corsa, you need to turn on the onboard computer and then scroll through the menu selecting…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos