Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter in the Opel Crossland X

Model: Vauxhall Crossland X MK 1 - Years 2017-2024
Part: Cabin air filter

In this video, you will see that a filter has been installed in the ventilation circuit of the Opel Crossland X to prevent dust and foreign objects from entering the cabin. To keep it efficient, you must periodically replace the filter element. To do this, open the bonnet of the engine compartment, detach the rubber seal of the drip tray at the base of the windscreen on the passenger side. Lift the grille just enough to insert your hand, unclip the lock holding the filter so you can remove it. Insert a new filter in its place, preferably an activated carbon model for better filtering capability, close the grille, and reinsert the seal.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Opel Crossland X
How to replace the cabin air filter of the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) The following steps will show us how to disassemble and replace the cabin air filter or pollen filter of the Opel Crossland X. First, we open the car…
Replacement of the cabin air filter of the Opel Crossland X.
Replacement of the cabin air filter of the Opel Crossland X.
Vauxhall Crossland X (2017-2024 / MK 1) By following these short and simple steps, we will see how to disassemble and replace the cabin air filter of the Opel Crossland X. First, we open th…
How to Replace the Air Filter on an Opel Crossland
How to Replace the Air Filter on an Opel Crossland
Vauxhall Crossland X (2017-2024 / MK 1) Before you begin, open the bonnet of your Opel Crossland. Start by unscrewing and removing the screws that secure the plastic cover inside the engine…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos