Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

To improve the audio system performance of the Opel Vivaro, the first step is to replace the factory radio with one that has better acoustic performance. Start by using a plastic lever to remove the light-coloured trim surrounding the radio and climate controls, applying force to the edges.

Unscrew the two Torx screws on each side that secure the unit to the dashboard and pull it out of its housing. Disconnect the rear electrical connectors by pressing the retaining clips and detach the aerial plug.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Removing the Standard Radio from the Opel Vivaro
Removing the Standard Radio from the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Today, follow these instructions to remove and replace the standard radio from the Opel Vivaro, as well as the Renault Trafic. First, get inside the …
How to enter the radio unlock code for an Opel Vivaro
How to enter the radio unlock code for an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) The radio in a vehicle locks when the battery is replaced; to unlock it, you will need to enter the unlock code. Entering the radio unlock code on an…
How to enter the unlock code for the radio of an Opel Vivaro
How to enter the unlock code for the radio of an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Entering the unlock code for the radio on an Opel Vivaro follows the same steps used to unlock the radio of a Renault Trafic. This operation is very …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos