Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Combo
    4. : How do you reset the Service light on the Opel Combo?

Vauxhall Combo - Video tutorial

Model: Vauxhall Combo Combo C, MK 3 - Years 2001-2011
Part: Checks and maintenance
Operation: How do you reset the Service light on the Opel Combo?

To reset the Service light on the Opel Combo, you need to press and hold the button located on the right side of the instrument panel while it is turned off. While continuing to hold down the button, you can insert the ignition key into the corresponding slot. This will allow you to turn on the instrument panel, and you will notice that the Service light will start flashing. You must continue to hold down the button until the light disappears completely. Once the procedure is complete, you can release the button and turn off the instrument panel.


Posted on 15 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Combo 2012-2018 - Where is the oil pressure sensor located in the Opel Combo? Read Answer
    • Combo 2019-2026 - When does the AdBlue error message appear in the Opel Combo? Read Answer
    • Combo 2019-2026 - What are the indicators of the Opel Combo? Read Answer
    • Combo 2001-2011 - Where is the inertia switch on the Opel Combo? Read Answer
    • Combo 2001-2011 - What warning lights can be found on the Opel Combo? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos