Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light in an Opel Meriva?

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, see how to reset the service light in an Opel Meriva, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by going inside the cabin, then insert the key and turn on the instrument panel; it is not necessary to start the engine.

Next, scroll through the display screens using the button located in the centre of the dashboard, reach the service screen in question, and perform the reset by holding down both the same button and the brake pedal. Finally, restart the vehicle.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Vauxhall Meriva (2010-2017 / Meriva B, MK 2) As shown in this tutorial, resetting the service light on the Opel Meriva B is a very simple and quick operation. Of course, before doing this, compl…
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this tutorial, you will see how to reset the service light on the Opel Meriva, a very simple and quick operation to be performed only after comple…
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this tutorial, you will see how to reset the service on the Opel Meriva, a task that is extremely simple and quick. Specifically, this applies to …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos