Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Display on an Opel Astra K

Model: Vauxhall Astra Astra K - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Instrument cluster

See other generations:
Video tutorial

This video shows how to replace the display on an Opel Astra K: a flickering or black screen is a common fault on Astra models that are at least three years old. Music plays, but the screen displays no image. Unfortunately, the only solution is to replace the screen, and the video lists all the tools needed.

First, remove the two black covers surrounding the screen; the larger one has ten clips to pry off. Next, remove the chrome strip held by eight clips, two of which are quite difficult to remove. Then, remove the two bolts to free the screen by lifting it upwards; disconnect the electrical connectors, remove the plastic panel, and then take out the red connector.

Carefully remove the ribbon cables for the touch screen digitiser. Remove the black plastic from under the circuit and also disconnect the other end of the ribbon cable to connect it to the new screen.

This is an important step: remove the lower screen frame by releasing the clips. It is necessary to remove it to allow the ribbon cable to be taken out and the new screen to be installed.

Refit the screen following the reverse instructions. You can find the new screen on quickcyce.co.uk by selecting "replacement screen navi ioo Opel Astra K"; the cost is £142.95, with shipping calculated at checkout.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2015-2022 / Astra K) You can replace the centre display on the Opel Astra by prising off a trim piece located just below the display: once this trim is removed, you will …
Vauxhall Astra (2015-2022 / Astra K) In this tutorial, you will see how to replace the display in the Opel Astra, a very simple and quick operation. First, ensure that the key is not ins…
Vauxhall Astra (2015-2022 / Astra K) Today we will discover the instructions that will allow us to disassemble and replace the central display of the dashboard, as well as the display of…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos