Do it yourself
| ||||
|
Resetting the service light of the Opel Corsa
Model: Vauxhall Corsa
Corsa C
- Years 2000-2006 When we approach the moment of replacing the engine oil of the Opel Corsa, a warning light on the instrument panel turns on to alert us of the need for intervention. Once the replacement is done, we must reset the control system. Sitting in the driver's seat, make sure the doors are closed, press and hold the "A" button located at the bottom right of the speedometer, after about three seconds we will see the message "insp0" appear, also press and hold the brake pedal and turn on the instrument panel. The "Insp" message will start flashing and after ten seconds a message with the updated mileage will appear. Release the button and the pedal, turn off the instrument panel, and at the next restart we can verify the warning light turning off.
Posted on 9 May 2024 by ScegliAuto
Resetting the service light on the Opel Corsa.
Vauxhall Corsa (2014-2019 / Corsa E) Through these brief steps we will see how to reset the maintenance service light for the regular oil change of the Opel Corsa. First of all, we get i
How to reset the service light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) These brief steps will show us how to reset the maintenance service light for the oil change of the Opel Corsa. First, we get into the car and start
How do you reset the Service light on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) The procedure for resetting the Service light on the Opel Corsa involves holding down the button located in the center of the instrument panel while Other guides that may interest you
|
Frequently Asked QuestionsHow to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.161
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |