|
Do it yourself
| |||
| ||||
How to change the fuel pump on an Opel Combo
Model: Vauxhall Combo
Combo D, MK 4
- Years 2012-2018
In this video, we see how to change the fuel pump on an Opel/Vauxhall Combo: the YouTuber had covered the cargo area with a wooden shelf, which is removed, revealing two "manholes". We are interested in the one closer to the edge of the cargo area. We remove the four screws holding the metal part in place, disconnect the electrical connector, and spray WD-40 around the cover; the gasket should be turned counterclockwise. Now we can lift the pump, removing the various electrical connectors and tubes from inside the cover. We can find the new pump, for example, on eBay with the code 266347443287, priced at 62.50 euros, with free delivery. It is always recommended to carefully check the compatibility of the part with your vehicle. Now we attach the new pump to the cover: tube and connectors, then immerse it, tighten the cap clockwise, reattach the electrical connector, and close the manhole. Job done.
Posted on 22 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Combo
(2001-2011 /
Combo C, MK 3)
Below we will see the main instructions that will allow us to disassemble and replace the water pump of the Opel Combo 1.3 CDTi. First, we open the h…
Vauxhall Combo
(2001-2011 /
Combo C, MK 3)
Any fuse present on the Opel Combo is contained inside one of the specific fuse boxes that are present on the vehicle: in this type of vehicle there …
Vauxhall Combo
(2012-2018 /
Combo D, MK 4)
Today we will show you the location of the fuse boxes of the Opel Combo model D. Inside the vehicle, there are two fuse boxes. The first fuse box is …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.768
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |