Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A simple trick to lower the floor on the Opel Astra K.

Model: Vauxhall Astra Astra K - Years 2015-2022
Part: Rear bench seat

In this video we see how the rear seat of the Opel Astra K can become a completely flat horizontal surface. If we lower the backrest on the seat, we notice that it remains raised, and cannot stay perfectly flat. In order to create a true flat surface that makes it similar to a small van, it is necessary to resort to a small trick. Before lowering the backrest, we must pull the headrest up as much as possible, so that - when it is turned over. The headrest does not hit the seat, but in the space that remains free with the front seat, in order to allow the seat to be perfectly horizontal.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stabiliser Bar on the Opel Astra H
How to Replace the Stabiliser Bar on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) In this video, you will see how to replace the stabiliser bar on the Opel Astra H: first, lift the vehicle. You can find the part on autoparts websit…
How to Check the Water Temperature on the Opel Astra H
How to Check the Water Temperature on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) A handy trick to monitor the water temperature and speedometer on the Opel Astra H: turn on the radio and press the "setting" button until you hear a…
How to open the front hood of the Opel Astra
How to open the front hood of the Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Opening the engine hood of the Opel Astra model G is a very simple operation and similar to all the other Opel models on the road. Some models differ…

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos