Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Engine oil

Lift the car with appropriate jacks and secure it with suitable supports to prevent it from falling. Place a plastic sheet and an oil collection tray under the engine. Use a Torx spanner to unscrew the oil drain plug on the sump and allow the oil to drain. Using a ratchet spanner, gently unscrew the oil filter and remove it from its housing. Replace the used cartridge with a new one, also replacing the O-ring seal, and refit the filter. Close the oil drain plug and top up with new oil. Check the correct level on the dipstick. Do not dispose of used oil in the environment; take it to designated collection centres.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement engine oil and oil filter on Opel Corsa D
Replacement engine oil and oil filter on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today we will see how to replace the engine oil and the oil filter, performing the regular routine maintenance service, on an Opel Corsa D. First of …
How to replace oil and filter on Opel Corsa
How to replace oil and filter on Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Oil and filter replacement on Opel Corsa. Let's see how to proceed with the replacement: we lift the car on a column bridge (jack). With a socket wre…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Vauxhall Corsa (2006-2014 / Corsa D) Position a suitable capacity tray under the oil sump and using a 45 Torx key, unscrew the drain plug located at the rear of the sump: to facilitate d…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos