Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

Position a suitable capacity tray under the oil sump and using a 45 Torx key, unscrew the drain plug located at the rear of the sump: to facilitate draining, unscrew the engine oil filler cap and remove the dipstick. Once the oil has drained completely, re-screw the plug.

Proceed with the oil filter replacement: this is a cartridge filter and the container is located near the coolant reservoir. Using a 25 socket wrench, unscrew the cap of the oil filter container and extract the old cartridge; replace it with the new one, applying the new O-rings included in the new filter's packaging, lubricate them with oil, and reassemble.

Finally, fill the engine with new oil according to the quantities and SAE specifications indicated in the user and maintenance manual.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Oil Filter Replacement on an Opel Corsa D
Engine Oil and Oil Filter Replacement on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today, you will learn how to replace the engine oil and the oil filter while performing the regular maintenance service on an Opel Corsa D. First, li…
How to Replace Engine Oil and Oil Filter on Opel Corsa C
How to Replace Engine Oil and Oil Filter on Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Today, you will learn how to independently replace the engine oil and oil filter on the Opel Corsa model C. Before performing the oil change, it is i…
How to Change the Engine Oil and Oil Filter in an Opel Corsa
How to Change the Engine Oil and Oil Filter in an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To replace the engine oil and filter on an Opel Corsa, open the bonnet and start the engine for a few minutes, then turn it off. Safely lift the vehi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos