Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Elyseo 50
Part: Battery

In this video tutorial, follow the instructions to remove and replace the battery on the Peugeot Elyseo 50 scooter by following these simple steps. First, place your scooter on the centre stand and start by removing the plastic cover found on the floorboard; underneath, you will find the battery, as shown in the video. At this point, disconnect both battery terminals (positive and negative) and remove the battery from its compartment; then recharge the battery or replace it with a new one of the same amperage, reassembling everything!

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission Oil of the Peugeot Elyseo 50
How to Replace the Transmission Oil of the Peugeot Elyseo 50
Elyseo 50 Follow these steps to drain and replace the transmission oil of the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and star…
How to Replace the Spark Plug of the Peugeot Elyseo 50
How to Replace the Spark Plug of the Peugeot Elyseo 50
Elyseo 50 Let's briefly go through the instructions that will allow you to remove and replace the spark plug of the engine of the Peugeot Elyseo 50 scooter. Fi…
How to Replace the Immobiliser Module of the Peugeot Elyseo 50
How to Replace the Immobiliser Module of the Peugeot Elyseo 50
Elyseo 50 This guide provides instructions on how to dismantle and replace the immobiliser module of the Peugeot Elyseo 50 scooter in simple steps. First, plac…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos