Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Peugeot Speedfight 3

Model: Peugeot Speedfight 3
Part: Exhaust muffler

This video is currently unavailable

To replace the exhaust on a Peugeot Speedfight 3, loosen the screws securing the upper cover panel of the exhaust, located on the right side of the bike next to the rear wheel. Once the screws are loosened, unscrew those fixing the exhaust to the corresponding supports and those securing the connection ring between the tailpipe and the exhaust pipe.

After the old exhaust is freed, insert the new one, securing it and checking that everything is functioning.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Replace the Drive Belt on the Peugeot Speedfight 3
How to Replace the Drive Belt on the Peugeot Speedfight 3
Speedfight 3 Today's guide will show you the steps to remove and replace the drive belt on the Peugeot Speedfight 3 scooter. First, place your scooter on the cent…
How do you replace the fairing of the Peugeot Speedfight 3?
How do you replace the fairing of the Peugeot Speedfight 3?
Speedfight 3 In order to replace the entire fairing of the Peugeot Speedfight 3, you need to remove the panels that make it up: you will need to start with the fr…
How to Replace the Variator and Belt on a Peugeot Speedfight 3
How to Replace the Variator and Belt on a Peugeot Speedfight 3
Speedfight 3 In today's tutorial video, you will see the steps to dismantle and replace the variator and drive belt on the Peugeot Speedfight 3 scooter. First, pl…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos