Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse layout and positioning for the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

Today, we will look at the positioning and how to find the fuse layout for the Peugeot Boxer, as well as the Citroen Relay and Fiat Ducato. First, open the rear door and start removing the plastic cover located on the right side, thus accessing the internal fuses and main relays; you will also find another fuse box inside and another one in the engine compartment, as shown in the video.

At this point, use the layout found in the owner's manual to locate the fuse diagram, replacing any blown fuses with new ones!


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Fuse Layout and Positioning for the Peugeot Boxer - Fiat Ducato
Fuse Layout and Positioning for the Peugeot Boxer - Fiat Ducato
Peugeot Boxer (2006-2024 / MK 2) Today's instructions will show the positioning and layout of the internal fuses for the Peugeot Boxer and the Fiat Ducato. First, open the driver's s…
Locating the Fuse Box and OBD Socket on a Peugeot Boxer
Locating the Fuse Box and OBD Socket on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Below are the instructions to locate the internal fuse box and the OBD diagnostic socket on a Peugeot Boxer, as well as on a Fiat Ducato. First, get …
What is the meaning of the fuse diagram for the Peugeot Boxer 2?
What is the meaning of the fuse diagram for the Peugeot Boxer 2?
Peugeot Boxer (2006-2024 / MK 2) Per Peugeot Boxer 2, we mean the work vehicle visible in the attached video. The fuse diagrams are related to the boxes where all of them are contain…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos