Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Removing the front bumper from a 2015 Peugeot 208 is a relatively simple and quick task that you can do yourself, aided by our brief video tutorial illustrating the steps to follow. To remove the bumper, open the bonnet and unscrew the upper screws along the edge.

Next, move on to removing the screws located in the wheel arch using a combination spanner, then remove the screws securing the sides. Disconnect the headlight connectors and proceed to unscrew the lower screws of the bumper.

Completely remove the bumper and continue with the internal work.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from a Peugeot 208?
How to Remove the Front Bumper from a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the front bumper on a Peugeot 208, you need to loosen the screws that secure the bumper to its housing: these screws are located inside th…
How to Remove the Front Bumper on a Peugeot 208?
How to Remove the Front Bumper on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) .. In this tutorial, you will see how to remove the front bumper on a Peugeot 208, a very simple and quick operation. First, open the bonnet,.. …
How to Remove the Front Bumper of the Peugeot 208
How to Remove the Front Bumper of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Follow these steps to remove the front bumper of the Peugeot 208: - Open the bonnet; - Remove the plastic clips covering the screws; - Unscrew the up…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos