Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front bumper on a Peugeot 208, a very simple and quick operation. First, open the bonnet, then undo the two bolts located on the upper side of the grille using a Torx T20 key. Next, move to the wheel arches, unscrew the screws located inside, and proceed to remove the plastic rivets present along the lower edge of the bumper.

Finally, grasp the bumper at one end, pull it outwards, and detach it from the frame. To fit the replacement, simply follow the reverse procedure.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Peugeot 208
How to Remove the Front Bumper of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Follow these steps to remove the front bumper of the Peugeot 208: - Open the bonnet; - Remove the plastic clips covering the screws; - Unscrew the up…
How to remove the front bumper on a Peugeot 208
How to remove the front bumper on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Removing the front bumper from a 2015 Peugeot 208 is a relatively simple and quick task that you can do yourself, aided by our brief video tutorial i…
How to Remove the Headlamp Unit from the Peugeot 208
How to Remove the Headlamp Unit from the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this brief and simple guide, you will learn the steps to remove and replace the front headlamp unit of the Peugeot 208. To remove the headlamp uni…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos