Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Seal on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

In this video, see how to replace the door seal on a Peugeot 206: you can find the part on eBay with the code 273344843158 at a price of £33.54 per roll plus £15.24 for delivery. It may be a bit too long, and you might need to cut a piece off. First, remove the worn rubber, starting from the door sill; this is where you will begin reinstalling it after cleaning the metal thoroughly, ensuring the lip of the new rubber adheres to the metal.

You can use a rubber mallet for perfect adhesion around the entire door. Be very careful with the corners; take a bit more time to get them right.

Once finished, spray a bit of silicone spray to improve adhesion, and that’s it.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to replace the pillar trim of a Peugeot 206
How to replace the pillar trim of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, we will see how to replace the door pillar trim of a Peugeot 206: we open the window, dry everything well in case it is wet, and then …
How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Replace the Front Door of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the front door of a Peugeot 206, open the door and disconnect the connector located between the two hinges. Once the connector is disconne…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos