Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to replace the front door of the Peugeot 206?

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door
Operation: How to replace the front door of the Peugeot 206?

In order to replace the front door of the Peugeot 206 you have to open the door itself and disconnect the connector located in the area between the two hinges. Once the connector has been disconnected, it will be possible to loosen the screws that secure the two hinges using a hex wrench. This will allow you to lift the door and remove it completely. Once the old door has been removed, it will be necessary to connect the new spare part to its connector and secure it by screwing the bolts of the relative hinges, verifying the correct functioning of the door.


Posted on 14 May 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • 206 1998-2012 - How to remove the door panel from a Peugeot 206? Read Answer
    • 206 1998-2012 - What to do if the rear door of the Peugeot 206 does not open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos