Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pillar trim of a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car door

Video tutorial

In this video, we will see how to replace the door pillar trim of a Peugeot 206: we open the window, dry everything well in case it is wet, and then remove the rubber seal from the window ledge of the door. We also remove the rubber seal from the pillar, and with a heat gun - if we don't have one, a powerful hairdryer will do - we remove the trim from the pillar.

Using this tool, we also remove the remaining glue and then clean well. We apply the new adhesive using a scraper to avoid air bubbles, making sure it adheres well with the heat gun, then we cut off the excess parts with a sharp cutter: be very careful not to damage the paint! We put back the vertical seal, then the one for the window, and we're done.


Posted on 14 March 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Panel of a Peugeot 206
How to Remove the Rear Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To remove the rear panel of a Peugeot 206, lift the rear seat and lower the backrest of the rear seats so that the panel clips are visible. Once thes…
How to Remove the Door Panel of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the passenger side door panel of a Peugeot 206? This guide explains the process. Before starting, disconnect the battery terminals in t…
How to replace the instrument panel on the Peugeot 206?
How to replace the instrument panel on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) You can replace the instrument panel on the Peugeot 206 by using a tool like a screwdriver to pry off the trim panel around the instrument cluster. O…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos