Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Connectors on a Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

Video tutorial

When the headlight bulbs have been replaced but the light still does not turn on, the cause lies in the malfunction of the connectors. In these cases, replacement is necessary.

For a Peugeot 207, the steps to follow are: - open the bonnet; - disconnect the connector; - use pliers to remove the broken wires; - connect the new wires by inserting them into the socket; - restore the headlight-bulb connection; Once finished, turn on the headlights and proceed to adjust the height of the headlights.

To ensure the headlights are even, insert a metal spacer before tightening the headlight nuts, which will raise the bulb again.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to replace the rear headlights bulbs in the Peugeot 207?
How to replace the rear headlights bulbs in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In this tutorial we can see how to replace the rear light bulbs in the Peugeot 207, a very simple and quick operation. First of all, make sure that t…
How to Replace the Battery in a Peugeot 207
How to Replace the Battery in a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the battery in a Peugeot 207 is not a difficult task. Start by opening the bonnet and removing the bolts using a 13 mm spanner from the met…
Where are the fuses located in the Peugeot 207?
Where are the fuses located in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) The fuse boxes of the Peugeot 207 are located inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be p…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos