Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulbs on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Headlight bulb

How to change the front headlamp bulbs on a Peugeot 308? Let’s see how to proceed in this video guide. Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it. Find the inspection cap of the headlamp (located at the rear of the headlamp) and remove it. Disconnect the bulbs with the metal clips, pull the bulb holders out of the headlamp and extract the damaged bulb using a screwdriver. Install the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlamp housing. Finally, close the headlamp with the inspection cap and reattach the water refill tube. Test the lights to ensure they are functioning correctly.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulb on Peugeot 308
Replacing Front Headlamp Bulb on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Have damaged bulbs on your Peugeot 308? Here's how to remove them from inside the headlamp. Open the front bonnet by pulling the lever located at the…
Replacing the Front Headlamp Bulbs on Peugeot 308
Replacing the Front Headlamp Bulbs on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Learn how to replace the front headlamp bulbs on a Peugeot 308. Lift the bonnet by pulling the lever located at the bottom right of the dashboard and…
How to Replace the Headlight Bulbs on a Peugeot 308
How to Replace the Headlight Bulbs on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop. Locate the rubber inspection cap at t…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos