Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Peugeot 207.

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

These brief instructions will allow us to disassemble and replace the front door panel of the Peugeot 207. First, we open the front door and begin to remove the plastic cover of the handle; we remove the cover of the opening handle and unscrew all the fixing screws that we find on it, as shown in the video. At this point, we disconnect the opening handle cable to remove the panel definitively, replacing it if necessary with a new one; now we will be able to access the internal components of the door.

Posted on 20 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel from a Peugeot 207
How to Remove the Door Panel from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How to remove the door panel (driver's side) from a Peugeot 207? This video explains how to proceed. Before starting the disassembly work, disconnect…
Removing the Door Panel from a Peugeot 207
Removing the Door Panel from a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Here’s how to remove the door panel from a Peugeot 207. Open the car door and start disassembling the parts to remove the cover panel. Unscrew the sc…
How to Replace Front Brake Discs on Peugeot 207
How to Replace Front Brake Discs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today, you will see step-by-step instructions on how to remove and replace the front brake discs on a Peugeot 207. First, lift the vehicle and start …

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos