Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light of the Peugeot Partner

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
This video is currently unavailable

The manual procedure for resetting the service light of your Peugeot Partner only takes a few seconds to complete and all you have to do is follow the following steps. First, you need to go inside the vehicle and reach the driver's seat, then locate the two buttons located respectively below the speedometer and the tachometer.

Immediately after, press both buttons at the same time and then start the instrument panel. Finally, wait for ten seconds and the service light reset is successfully completed.


Posted on 20 January 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Partner
How to Reset the Service Light on the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) This short video illustrates the procedure to reset the service light on the 2015 Peugeot Partner. The procedure takes only a few seconds and require…
How to Reset the Service Light on a Peugeot Partner
How to Reset the Service Light on a Peugeot Partner
Peugeot Partner Tepee (1996-2013 / MK 1) In this article, we will illustrate the procedure to reset the service light on the Peugeot Partner. First, turn on the ignition, then turn it off. A…
How to reset the service indicator light on the 2019 Peugeot Partner.
How to reset the service indicator light on the 2019 Peugeot Partner.
Peugeot Partner Tepee (2018-2026 / MK 3) In the following article, we will see how to reset the service indicator light of the 2019 Peugeot Partner in case it is not done by the workshop tha…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos